The RSM 6310 is a single-row deep groove ball bearing in the standard 63 Series , designed for applications requiring good radial load capacity, stable rotation, and dependable service life . This bearing size is widely used in electric motors, pumps, conveyors, gearboxes, industrial fans, and general machinery. ...

MRC (SKF) 5204SBKFF is a double row ball bearing in the 5204 dimensional series, commonly used where a compact bearing must support radial loads together with axial loads in both directions . Its nominal dimensions are approximately 20 mm bore × 47 mm outside diameter × 20.6 mm width . The suffix...

NICE 1606DS Ball Bearing is an inch-size precision ball bearing used in industrial machinery, motors, mechanical assemblies, transmission equipment, and general rotating applications. The 1606DS designation is manufacturer-specific, so the exact dimensions, sealing/shielding arrangement, internal clearance, cage, and lubrication configuration should be...

MRC (SKF) 5209 Double Row Ball Bearing is a metric double-row bearing commonly used where a compact bearing arrangement must support radial loads together with axial loads in both directions . The nominal 5209 dimensions are approximately 45 mm bore × 85 mm outside diameter × 30.2 mm width .<span...

NICE 1622DS-TN Ball Bearing is an inch-series industrial ball bearing intended for rotating equipment such as motors, gearboxes, pumps, conveyors, transmission assemblies, and general machinery. The suffix DS-TN is manufacturer-specific, so the exact sealing/shielding arrangement, cage material, internal clearance, lubrication, dimensions, and other...

SKF 6309 Ball Bearing is a standard metric single-row deep groove ball bearing with nominal dimensions of 45 mm bore × 100 mm outside diameter × 25 mm width . It is widely used in electric motors, industrial pumps, gearboxes, fans, conveyors, agricultural machinery, transmission systems, and other rotating equipment. The...

MRC (SKF) 5218KF Double Row Ball Bearing is a large metric double-row bearing commonly used where a compact bearing arrangement must support high radial loads together with axial loads in both directions . The nominal 5218 dimensions are approximately 90 mm bore × 160 mm outside diameter × 52.4 mm...

NICE 1638DS Ball Bearing is a single-row, double-shielded deep groove radial ball bearing manufactured in inch dimensions. It has a 3/4-inch (19.05 mm) bore, 2-inch (50.80 mm) outside diameter, and 9/16-inch (14.29 mm) width . The DS configuration uses metal shields on both sides to help retain...

FAG 6405 Ball Bearing is a standard metric single-row deep groove ball bearing with nominal dimensions of 25 mm bore × 80 mm outside diameter × 21 mm width . It is designed for industrial rotating equipment where reliable radial-load support, smooth operation, and moderate axial-load capability are...

MRC (SKF) ER-19 Ball Bearing is an inch-series industrial ball bearing with a 1-3/16 inch (30.16 mm) bore , 62 mm outside diameter , and 22.2 mm outer-race width . It features a set-screw locking system with screws positioned 120° apart , allowing the bearing inner ring to...

HOFFMAN 62300 Ball Bearing is a single-row deep groove ball bearing with an unusually wide cross-section, using nominal dimensions of 10 mm bore × 35 mm outside diameter × 17 mm width . The original Hoffmann brand was a historic British bearing manufacturer, and genuine older Hoffmann bearings are now commonly...

MRC (SKF) 210-MFF-G1 Ball Bearing is a special Max-Type / Filling-Slot deep groove ball bearing designed to carry higher radial loads than a conventional 6210-type bearing of similar dimensions. The bearing uses a filling-slot construction , allowing a greater number of balls to be installed inside the bearing. This increases its...