



Seal4Go.Com One Stop Sealing Solution
Seal4Go.Com One Stop Sealing Solution
AKRON Oil Seal 17x34x4.5 TG NBR is a compact metric industrial rotary shaft seal designed for bearing housings, electric motors, pumps, small gearboxes, mechanical drives, agricultural equipment, and general rotating machinery. Identified by the manufacturer-specific TG Profile, this seal uses oil-resistant NBR (Nitrile Butadiene Rubber) to help retain compatible oil or grease around a 17 mm shaft.
The AKRON Oil Seal 17x34x4.5 TG NBR is designed for rotary shaft applications requiring lubricant retention around a 17 mm shaft within a 34 mm housing bore.
Installed between the rotating shaft and stationary housing, the sealing element maintains controlled contact with the shaft surface to help reduce leakage of compatible lubricants and protect internal rotating components such as bearings, gears, and shafts.
The product is identified by the AKRON manufacturer designation TG. This is a manufacturer-specific profile code. The exact sealing-lip geometry, number of lips, dust-exclusion arrangement, outside-case construction, internal reinforcement, spring configuration, lip orientation, and installation direction should be verified against the original AKRON seal, technical drawing, or equipment specification before replacement.
Manufactured from NBR (Nitrile Butadiene Rubber), the sealing element is generally suitable for:
NBR generally provides good resistance to petroleum-based oils, grease, abrasion, and mechanical wear under normal industrial service. Compatibility should be verified before use with aggressive chemicals, certain fuels, specialized synthetic fluids, ozone-rich environments, or continuous elevated-temperature operation.
The dimensions are:
Shaft diameter: 17 mm / approximately 0.669 in
Housing diameter: 34 mm / approximately 1.339 in
Seal width: 4.5 mm / approximately 0.177 in
The 17 × 34 × 4.5 mm configuration is suitable for compact bearing housings, small motors, pumps, gear units, mechanical drives, and other machinery requiring a thin-section metric shaft seal.
⚙️ Applications
🎯 Benefits
✔ Helps retain compatible oil or grease
✔ Compact 4.5 mm axial width
✔ Oil-resistant NBR sealing material
✔ Suitable for 17 mm shaft assemblies
✔ Manufacturer-specific AKRON TG profile
✔ Good resistance to abrasion and wear
✔ Suitable for compact rotating equipment
✔ Useful for maintenance and overhaul work
✔ Replacement ready when dimensions and TG profile match
🧠 Technical Insight
✅ Key Features
📊 Specifications
Brand: AKRON
Model / Profile: TG
Size: 17 × 34 × 4.5 mm
Inch Equivalent: Approximately 0.669 × 1.339 × 0.177 in
Type: Compact Industrial Rotary Shaft Oil Seal
Material: NBR (Nitrile Butadiene Rubber)
Profile: TG
Construction: Manufacturer-Specific AKRON TG Rotary Shaft-Seal Construction
Lip Design: TG profile; verify exact sealing-lip geometry, number of lips, and orientation against the original seal or technical drawing
Dust Lip: Verify from the actual TG cross-section
Spring Type: Verify from the actual TG seal construction
Shaft Diameter (ID): 17 mm
Housing Diameter (OD): 34 mm
Width: 4.5 mm
Pressure Capability: Low-pressure rotary shaft-sealing service unless otherwise specified
Lubrication: Compatible oil and grease
Temperature Range: Typically approximately -30°C to +100°C for standard NBR; verify the actual compound, lubricant, shaft speed, and operating conditions
Speed Consideration: Permissible speed depends on shaft diameter, surface finish, lubrication, temperature, alignment, runout, lip loading, and actual NBR compound
Installation Consideration: Because of the relatively thin 4.5 mm section, confirm installation depth, housing condition, shaft finish, lip orientation, and avoid deforming the seal during installation
Application Class: Compact Industrial Bearing and Rotating Equipment
Standard: Metric Specialized Industrial Seal
🔁 Equivalent
Suitable replacement or cross-reference candidate for compatible:
The same dimensions alone do not guarantee interchangeability. The replacement must match the original TG cross-section, sealing-lip geometry, lip orientation, outside-case construction, internal reinforcement, spring configuration, installation direction, material compound, and operating requirements.
(Always verify dimensions, TG-profile geometry, lip direction, shaft finish, housing condition, installation depth, lubricant compatibility, rotational speed, temperature, runout, pressure, and operating conditions before ordering.)
📦 Availability
✅ In Stock
🚚 Fast Delivery Available
🌎 Worldwide Shipping Available
📦 MOQ: 1 Piece
🏭 Suitable for electric-motor repair, small gearbox overhaul, bearing-housing maintenance, pump servicing, agricultural-equipment repair, compact machinery maintenance, and compatible OEM replacement applications.
📲 Contact via LINE ID: dusitrea
📧 Email: sales@seal4go.com
💬 Technical support available before ordering
🔍 Assistance available for cross-reference and equivalent part identification
Data sheet
Specific References
No customer reviews for the moment.