

Seal4Go.Com One Stop Sealing Solution
Seal4Go.Com One Stop Sealing Solution
MRC (SKF) 208SFF is a single-row deep groove radial ball bearing from the traditional MRC 200-S series.
Standard dimensions:
Bore: 40 mm
Outside Diameter: 80 mm
Width: 18 mm
This dimensional envelope corresponds to the modern 6208 bearing family.
The FF suffix in this MRC product family is generally associated with a double-side protected / typically double metal shielded configuration, making 6208-2Z / 6208ZZ the most relevant modern cross-reference family, subject to confirmation of the original bearing execution.
The MRC 208SFF is a single-row deep groove ball bearing designed primarily for radial load while also supporting moderate axial load in both directions.
Its principal dimensions are:
40 × 80 × 18 mm
which correspond to the standard modern bearing designation:
6208
The bearing uses a conventional non-filling-slot / Conrad-type deep groove construction.
The FF protected configuration helps retain grease and reduces the entry of dust and larger contaminants while maintaining relatively low friction compared with contact rubber-sealed bearings.
⚙️ Applications
🎯 Benefits
✔ Standard 40 × 80 × 18 mm dimensions
✔ Single-row deep groove construction
✔ Double-side protected configuration
✔ Good grease retention
✔ Low running friction
✔ Good radial-load capability
✔ Supports moderate axial load in both directions
✔ Suitable for relatively high-speed applications when operating conditions permit
✔ Modern 6208-series replacements are widely available
🧠 Technical Insight
✅ Key Features
📊 Specifications
Brand: MRC (SKF)
Model / Bearing Number: 208SFF
Series: MRC 200-S Series
Modern Dimensional Reference: 6208
Product Type: Deep Groove Ball Bearing
Bearing Type: Single-Row Radial Ball Bearing
Construction: Standard Deep Groove / Non-Filling-Slot / Conrad Type
Bore Diameter (d): 40.00 mm
Outside Diameter (D): 80.00 mm
Width (B): 18.00 mm
Rolling Elements: Ball
Number of Rows: 1
Closure: Protected on both sides
FF Suffix: Typically associated with double-side shielding / protection in this MRC bearing family; verify the physical bearing if closure type is critical
Primary Load: Radial
Axial Load Capability: Moderate axial load in both directions depending on speed, fit, lubrication, and operating load
Lubrication: Normally grease-retaining protected-bearing configuration
Internal Clearance: Not defined by the basic 208SFF designation; verify Normal, C3, or other clearance if required
Cage: Verify original MRC production specification
Dynamic Load Rating: Verify original MRC or exact modern replacement data
Static Load Rating: Verify original MRC or exact modern replacement data
Speed Rating: Depends on shield construction, grease, internal clearance, shaft/housing fit, temperature, and load
Shaft Fit: Nominal 40 mm shaft
Housing Fit: Nominal 80 mm bearing seat
🔁 Equivalent
Suitable dimensional replacement or cross-reference candidates include:
The dimensional relationship is:
MRC 208SFF = 40 × 80 × 18 mm
which corresponds to:
6208
If the original FF execution is confirmed as double metal shielded, the most relevant modern cross-reference family is:
6208-2Z / 6208ZZ
depending on manufacturer terminology.
Both commonly share:
40 × 80 × 18 mm
but the closure system is different.
6208-2Z / 6208ZZ
6208-2RS / 2RSH / 2RS1
Therefore, 6208-2RS should not automatically replace MRC 208SFF solely because the dimensions match.
Before replacing MRC 208SFF, verify:
Dimensions alone do not guarantee complete interchangeability.
(Always verify the full marking and actual closure of the original MRC 208SFF before selecting SKF 6208-2Z, FAG 6208-2Z, NTN 6208ZZ, NSK 6208ZZ, or another replacement.)
📦 Availability
✅ In Stock
🚚 Fast Delivery Available
🌎 Worldwide Shipping Available
📦 MOQ: 1 Piece
🏭 Suitable for electric motors, pumps, fans, gearboxes, conveyors, rollers, agricultural machinery, processing equipment, and general industrial machinery requiring a 40x80x18 mm double-side protected deep groove ball bearing.
📲 Contact via LINE ID: dusitrea
📧 Email: sales@seal4go.com
💬 Technical support available before ordering
🔍 Assistance available for cross-reference and equivalent part identification
Specific References
No customer reviews for the moment.