OIL SEAL UNIVERSAL 2.500x3.375x0.500 T2 NBR Price | Seal for Bearings, Gearboxes, Pumps & Industrial Machinery
      OIL SEAL UNIVERSAL 2.500x3.375x0.500 T2 NBR Price | Seal for Bearings, Gearboxes, Pumps & Industrial Machinery
      OIL SEAL UNIVERSAL 2.500x3.375x0.500 T2 NBR Price | Seal for Bearings, Gearboxes, Pumps & Industrial Machinery
      OIL SEAL UNIVERSAL 2.500x3.375x0.500 T2 NBR Price | Seal for Bearings, Gearboxes, Pumps & Industrial Machinery

      OIL SEAL UNIVERSAL 2.500x3.375x0.500 T2 NBR Price | Seal for Bearings, Gearboxes, Pumps & Industrial Machinery

      Review (0)

      UNIVERSAL Oil Seal 2.500x3.375x0.500 T2 NBR is an inch-size industrial rotary shaft seal designed for bearing housings, gearboxes, pumps, mechanical transmissions, electric motors, agricultural machinery, conveyor systems, and legacy rotating equipment. Identified by the manufacturer-specific T2 Profile, this seal uses oil-resistant NBR (Nitrile Butadiene Rubber) to help retain compatible oil or grease around a 2.500-inch shaft.

      • Security policySecurity policy
      • Delivery policyDelivery policy
      • Return policyReturn policy

      The UNIVERSAL Oil Seal 2.500x3.375x0.500 T2 NBR is designed for industrial rotary shaft applications requiring lubricant retention around a 2.500-inch shaft within a 3.375-inch housing bore.

      Installed between the rotating shaft and stationary housing, the sealing element maintains controlled radial contact with the shaft surface. This helps reduce leakage of compatible oil or grease while supporting the protection of bearings, gears, pumps, transmissions, motors, and other internal rotating components.

      The product is identified by the UNIVERSAL manufacturer designation T2. This is a manufacturer-specific profile code. The exact sealing-lip geometry, number of lips, dust-exclusion arrangement, outside-case construction, internal reinforcement, spring configuration, lip orientation, and installation direction should be verified against the original seal, technical drawing, or equipment specification before replacement.

      Manufactured from NBR (Nitrile Butadiene Rubber), the sealing element is generally suitable for:

      • Mineral oils
      • Gear oils
      • Hydraulic oils
      • Bearing grease
      • Petroleum-based lubricants
      • General industrial lubricating fluids

      NBR provides good resistance to petroleum-based oils, grease, abrasion, and mechanical wear under normal industrial operating conditions. Compatibility should be verified before use with aggressive chemicals, fuels, specialized synthetic lubricants, ozone-rich environments, or continuous elevated-temperature service.

      The inch dimensions convert approximately to:

      Shaft diameter: 2.500 inches or 63.50 mm

      Housing diameter: 3.375 inches or approximately 85.73 mm

      Seal width: 0.500 inch or 12.70 mm

      The 2.500 × 3.375 × 0.500-inch configuration is suitable for medium-size bearing housings, gearboxes, pumps, transmissions, industrial drives, and legacy machinery using an inch-size rotary shaft-sealing arrangement.

      ⚙️ Applications

      • Industrial gearboxes
      • Bearing housings
      • Industrial pumps
      • Electric motor assemblies
      • Mechanical transmissions
      • Agricultural machinery
      • Construction equipment
      • Conveyor drive systems
      • Legacy industrial machinery
      • OEM rotating equipment

      🎯 Benefits

      ✔ Helps retain compatible oil or grease

      ✔ Helps protect bearings and internal components

      ✔ Oil-resistant NBR sealing material

      ✔ Suitable for 2.500-inch shaft assemblies

      ✔ Manufacturer-specific UNIVERSAL T2 profile

      ✔ Good resistance to abrasion and wear

      ✔ 0.500-inch axial width

      ✔ Suitable for maintenance and overhaul work

      ✔ Replacement ready when dimensions and T2 profile match

      🧠 Technical Insight

      • UNIVERSAL T2 Seal Reference
      • Inch-Size Rotary Shaft Seal
      • NBR Sealing Material
      • Manufacturer-Specific T2 Profile
      • Radial Shaft-Sealing Function
      • Low-Pressure Lubricant Retention
      • 63.50 mm Shaft Diameter
      • Exact T2 Cross-Section Must Be Verified

      ✅ Key Features

      • UNIVERSAL Industrial Quality
      • T2 Profile Reference
      • Oil-Resistant NBR Material
      • Inch-Size Construction
      • 2.500x3.375x0.500 Dimensions
      • Suitable for Compatible Oil and Grease
      • Industrial Replacement Seal
      • Cross-Reference Support Available

      📊 Specifications

      Brand: UNIVERSAL

      Model / Profile: T2

      Size: 2.500 × 3.375 × 0.500 inch

      Metric Equivalent: Approximately 63.50 × 85.73 × 12.70 mm

      Type: Industrial Rotary Shaft Oil Seal

      Material: NBR (Nitrile Butadiene Rubber)

      Profile: T2

      Construction: Manufacturer-Specific UNIVERSAL T2 Rotary Shaft-Seal Construction

      Lip Design: T2 profile; verify exact sealing-lip geometry, number of lips, and orientation against the original seal or technical drawing

      Dust Lip: Verify from the actual T2 cross-section

      Spring Type: Verify from the actual seal construction

      Shaft Diameter (ID): 2.500 inches / 63.50 mm

      Housing Diameter (OD): 3.375 inches / approximately 85.73 mm

      Width: 0.500 inch / 12.70 mm

      Pressure Capability: Low-pressure rotary shaft-sealing service unless otherwise specified

      Lubrication: Compatible oil and grease

      Temperature Range: Typically approximately -30°C to +100°C for standard NBR; verify the actual compound, lubricant, shaft speed, and operating conditions

      Speed Consideration: Permissible speed depends on shaft diameter, surface finish, lubrication, temperature, alignment, concentricity, runout, lip loading, and NBR compound

      Installation Consideration: Confirm shaft finish, housing-bore condition, installation depth, lip direction, concentricity, and protection from sharp shaft edges before fitting

      Application Class: Medium Industrial Bearing and Rotating Equipment

      Standard: Inch-Size Specialized Industrial Seal

      🔁 Equivalent

      Suitable replacement or cross-reference candidate for compatible:

      • UNIVERSAL T2 NBR Rotary Shaft Seal
      • UNIVERSAL 2.500x3.375x0.500 Oil Seal
      • 63.50x85.73x12.70 Rotary Seal
      • 2.500-Inch Shaft Oil Seal
      • Inch-Size NBR Rotary Shaft Seal
      • Industrial Bearing Housing Seal
      • Industrial Gearbox Shaft Seal
      • Industrial Pump Shaft Seal
      • OEM T2 Profile Oil Seal
      • Industrial NBR Shaft Seal

      The same dimensions alone do not guarantee interchangeability. The replacement must match the original T2 cross-section, sealing-lip geometry, lip orientation, outside-case construction, reinforcement arrangement, spring configuration, installation direction, material compound, and operating requirements.

      (Always verify dimensions, T2-profile geometry, lip direction, shaft finish, housing condition, installation depth, lubricant compatibility, rotational speed, temperature, runout, pressure, and operating conditions before ordering.)

      📦 Availability

      ✅ In Stock

      🚚 Fast Delivery Available

      🌎 Worldwide Shipping Available

      📦 MOQ: 1 Piece

      🏭 Suitable for gearbox overhaul, bearing-housing maintenance, industrial pump repair, motor servicing, transmission maintenance, agricultural-machinery repair, conveyor-drive servicing, legacy-equipment restoration, and compatible OEM replacement applications.

      📲 Contact via LINE ID: dusitrea

      📧 Email: sales@seal4go.com

      💬 Technical support available before ordering

      🔍 Assistance available for cross-reference and equivalent part identification

      USI-2512-UNIVERSAL-2.500X3.375X0.500-T2-NBR

      Data sheet

      Inside Diameter (I.D.) - inch
      Outside Diameter (O.D.) - inch
      Thinkness - inch
      Material
      NBR
      Cover Material
      CARBON STEEL
      Standard Type
      T-2
      Brand
      UNIVERSAL-USA
      Item Condition
      New

      Specific References

      No customer reviews for the moment.

      Write your review
      OIL SEAL UNIVERSAL 2.500x3.375x0.500 T2 NBR Price | Seal for Bearings, Gearboxes, Pumps & Industrial Machinery
      UNIVERSAL Oil Seal 2.500x3.375x0.500 T2 NBR

      OIL SEAL UNIVERSAL 2.500x3.375x0.500 T2 NBR Price | Seal for Bearings, Gearboxes, Pumps & Industrial Machinery