The MRC 112KSFF is a compact extra-light-series deep groove ball bearing designed primarily for radial loads while also supporting moderate axial loads in both directions.

Its dimensional envelope is:

60 × 95 × 18 mm

which corresponds to the standard modern:

6012

MRO Supply identifies the bearing as double shielded, with normal radial internal clearance, steel balls, and a metal cage. MRO Supply

The FF suffix in this MRC series is associated with a double-shielded execution, making the bearing suitable for grease retention and protection from larger contaminants while maintaining relatively low sealing friction.

⚙️ Applications

• Electric motors
• Pumps
• Fans and blowers
• Gearboxes
• Industrial machinery
• Conveyor systems
• Agricultural machinery
• Industrial rollers
• Power-transmission equipment
• General rotating machinery

🎯 Benefits

✔ Standard 60 × 95 × 18 mm dimensions

✔ MRC 100-KS Extra Light Series

✔ Single-row deep groove construction

✔ Double metal shields

✔ Normal internal clearance

✔ Steel cage

✔ Good radial-load capability

✔ Moderate axial-load capability in both directions

✔ Lower sealing drag than typical contact rubber seals

✔ Modern 6012-series replacements widely available

🧠 Technical Insight

• MRC 112KSFF
• MRC 100-KS Extra Light Series
• Deep Groove Ball Bearing
• 60 mm Bore
• 95 mm Outside Diameter
• 18 mm Width
• Double Shielded
• Normal Clearance
• Modern Dimensional Reference: 6012

✅ Key Features

• MRC (SKF) Bearing
• Model 112KSFF
• 100-KS Extra Light Series
• Single-Row Deep Groove Ball Bearing
• 60 mm ID
• 95 mm OD
• 18 mm Width
• Double Metal Shields
• Steel Cage
• Standard Precision

📊 Specifications

Brand: MRC (SKF)

Model / Bearing Number: 112KSFF

Series: MRC 100-KS Extra Light Series

Modern Dimensional Reference: 6012

Product Type: Deep Groove Ball Bearing

Bearing Type: Single-Row Radial Ball Bearing

Bore Diameter (d): 60.00 mm

Outside Diameter (D): 95.00 mm

Width (B): 18.00 mm

Rolling Elements: Ball

Number of Rows: 1

Enclosure: Double Shielded

Seal / Shield Material: Metal

Seal Type: Non-contact metal shields

Cage: Metal / Steel

Internal Clearance: Normal Clearance

Precision: Standard / ABEC 1

Primary Load: Radial

Axial Load Capability: Moderate axial load in both directions depending on operating conditions

Dynamic Load Rating: 7,310 lbf / approx. 32.5 kN according to current MRC/SKF distributor data. MRO Supply

Static Load Rating: 5,620 lbf / approx. 25.0 kN according to current distributor data. MRO Supply

Fillet Radius: 1 mm MRO Supply

Lubrication: Grease-retaining shielded-bearing configuration

Speed Rating: Verify the exact standard-steel 112KSFF rating for the operating condition; do not substitute HYB hybrid-bearing speed values

Shaft Fit: Nominal 60 mm shaft

Housing Fit: Nominal 95 mm bearing seat

🔁 Equivalent

Suitable replacement or cross-reference candidates include:

• MRC 112KSFF
• SKF 6012-2Z
• SKF 6012-ZZ
• FAG 6012-2Z
• NSK 6012ZZ
• NTN 6012ZZ
• KOYO 6012ZZ
• NACHI 6012ZZ
• 60x95x18 Double-Shielded Deep Groove Ball Bearing

An independent bearing interchange table maps MRC 112KSFF to the 6012 ZZ family. industrial.endurobearings.com

MRC 112KSFF → Modern 6012 Family

The key dimensional relationship is:

MRC 112KSFF = 60 × 95 × 18 mm

which corresponds to the modern:

6012

For a double-metal-shielded replacement, the most relevant family is:

6012-2Z / 6012ZZ

depending on manufacturer nomenclature.

6012-2Z vs 6012-2RS

Both generally share:

60 × 95 × 18 mm

but their sealing systems differ.

6012-2Z / ZZ

• Metal shields on both sides
• Non-contact or very low-drag protection
• Lower friction
• Generally better for higher-speed applications
• Good grease retention
• Good protection from larger dust and debris

6012-2RS / 2RSH / 2RS1

• Rubber seals on both sides
• Better protection against fine dust and moisture
• Higher sealing friction
• Usually lower permissible speed

Therefore, 6012-2RS should not automatically replace MRC 112KSFF solely because the dimensions match.

Important Cross-Reference Consideration

Before replacement, verify:

• Bore = 60 mm
• OD = 95 mm
• Width = 18 mm
• Double metal shields
• Internal clearance
• Cage construction
• Lubricant
• Precision class
• Dynamic / static load requirements
• Operating speed
• Shaft fit
• Housing fit

(Always verify the complete marking on the original MRC 112KSFF before selecting SKF 6012-2Z, FAG 6012-2Z, NTN 6012ZZ, NSK 6012ZZ, or another replacement.)

📦 Availability

✅ In Stock

🚚 Fast Delivery Available

🌎 Worldwide Shipping Available

📦 MOQ: 1 Piece

🏭 Suitable for electric motors, pumps, fans, gearboxes, conveyors, rollers, agricultural machinery, and general industrial equipment requiring a 60x95x18 mm double-shielded deep groove ball bearing.

📲 Contact via LINE ID: dusitrea

📧 Email: sales@seal4go.com

💬 Technical support available before ordering

🔍 Assistance available for cross-reference and equivalent part identification