The GARLOCK PS-SEAL 24N-045-6469, size 45x62x8 mm, is designed for rotary shaft applications requiring sealing around a 45 mm shaft within a 62 mm housing bore.

PS-SEAL designs differ from conventional elastomer radial oil seals. They typically utilize a low-friction PTFE-based sealing lip supported within a rigid carrier or case structure. This construction makes the PS-SEAL family suitable for selected applications involving higher temperatures, aggressive fluids, higher shaft speeds, limited lubrication, or process conditions where standard NBR seals may be unsuitable.

Typical compatible applications may involve:

• Mineral oils
• Synthetic lubricants
• Hydraulic fluids
• Process fluids
• Selected solvents and chemicals
• High-temperature lubricants
• Low-lubrication service
• Selected dry-running applications

Actual compatibility must be determined from the specific 24N sealing compound, process medium, temperature, pressure, and shaft speed.

The product identification 24N-045-6469 should be treated as an important GARLOCK reference. The code should not be interpreted solely from its individual letters or digits without the manufacturer specification. The exact PTFE formulation, filler system, lip geometry, lip direction, case material, energizing method, and pressure capability should be confirmed from the original seal or GARLOCK documentation.

The dimensions are:

Shaft Diameter: 45 mm

Housing Diameter: 62 mm

Seal Width: 8 mm

The compact 45 × 62 × 8 mm envelope makes this seal suitable for pumps, gearboxes, mixers, process machinery, motors, chemical equipment, food-processing machinery, and specialized OEM rotating equipment where the original installation specifies this PS-SEAL configuration.

⚙️ Applications

• Industrial pumps
• Chemical-process equipment
• Industrial gearboxes
• Mixers and agitators
• Process machinery
• High-speed rotating equipment
• Hydraulic equipment
• Food-processing machinery
• Pharmaceutical process equipment
• Specialized OEM machinery

🎯 Benefits

✔ Low-friction sealing technology

✔ Suitable for demanding rotary applications

✔ Broad potential chemical compatibility

✔ Suitable for higher-temperature service depending on compound

✔ Compact 45x62x8 mm installation size

✔ Can support selected low-lubrication applications

✔ Suitable for higher shaft speeds when properly specified

✔ Ideal for specialized maintenance and overhaul work

✔ Direct reference available as GARLOCK 24N-045-6469

🧠 Technical Insight

• GARLOCK PS-SEAL Technology
• Part / Reference No. 24N-045-6469
• Metric Rotary Shaft Seal
• PTFE-Based Sealing Technology Common to PS-SEAL Family
• Low-Friction Dynamic Sealing
• 45 mm Shaft Diameter
• Compact 8 mm Axial Width
• Exact 24N Compound and Lip Geometry Must Be Verified

✅ Key Features

• GARLOCK Industrial Sealing Technology
• PS-SEAL Product Family
• Reference 24N-045-6469
• Compact Metric Construction
• 45x62x8 mm Dimensions
• Suitable for Demanding Process Applications
• Specialized Rotary Shaft Seal
• Cross-Reference Support Available

📊 Specifications

Brand: GARLOCK

Product Family: PS-SEAL

Part / Reference Number: 24N-045-6469

Size: 45 × 62 × 8 mm

Type: High-Performance Rotary Shaft Seal

Sealing Material: Typically PTFE-based in the PS-SEAL family; exact 24N compound must be verified

Profile: GARLOCK PS-SEAL 24N Configuration

Construction: Manufacturer-Specific PS-SEAL Assembly with Supported Dynamic Sealing Element

Lip Design: Manufacturer-specific PS-SEAL geometry; verify exact lip configuration and sealing direction

Number of Lips: Verify against the actual 24N-045-6469 construction

Dust Lip: Verify from the specific PS-SEAL configuration

Spring / Energizer: Verify from the actual 24N seal design; do not assume conventional garter-spring construction

Case Material: Verify from GARLOCK specification or the original component

Shaft Diameter (ID): 45 mm

Housing Diameter (OD): 62 mm

Width: 8 mm

Pressure Capability: Depends on PS-SEAL configuration, shaft speed, support arrangement, temperature, and application

Lubrication: May support lubricated, marginally lubricated, or selected dry-running applications depending on actual compound and design

Temperature Range: PTFE-based seals generally support a wider temperature range than conventional NBR seals, but the actual limit for 24N-045-6469 must be verified from the specified compound and application

Chemical Compatibility: Potentially broad; verify the exact 24N compound against the process medium

Speed Consideration: Suitable shaft speed depends on diameter, surface finish, pressure, lubrication, temperature, runout, lip design, and compound

Shaft Surface Requirement: Surface finish, hardness, concentricity, and runout are important for reliable PTFE dynamic sealing

Application Class: High-Performance Industrial and Process Rotating Equipment

Standard: Metric Specialized Rotary Shaft Seal

🔁 Equivalent

Suitable replacement or cross-reference candidate for compatible:

• GARLOCK PS-SEAL 24N-045-6469
• GARLOCK PS-SEAL 45x62x8
• 45x62x8 PTFE Shaft Seal
• 45 mm Rotary Shaft Seal
• High-Performance PTFE Oil Seal
• Chemical-Resistant Shaft Seal
• High-Temperature Rotary Seal
• Process Pump Shaft Seal
• Low-Friction Rotary Lip Seal
• OEM 45x62x8 Process Seal

The same 45x62x8 mm dimensions alone do not guarantee interchangeability. The replacement must match the original GARLOCK PS-SEAL configuration, 24N compound, lip geometry, sealing direction, case construction, shaft specification, pressure capability, installation depth, and operating conditions.

(Always verify Part No. 24N-045-6469, sealing compound, lip geometry, shaft finish, shaft hardness, housing condition, installation direction, media compatibility, rotational speed, temperature, pressure, runout, and operating conditions before ordering.)

📦 Availability

✅ In Stock

🚚 Fast Delivery Available

🌎 Worldwide Shipping Available

📦 MOQ: 1 Piece

🏭 Suitable for industrial pumps, process machinery, mixers, gearboxes, chemical equipment, hydraulic systems, high-speed machinery, food-processing systems, pharmaceutical equipment, and compatible OEM applications requiring GARLOCK PS-SEAL technology.

📲 Contact via LINE ID: dusitrea

📧 Email: sales@seal4go.com

💬 Technical support available before ordering

🔍 Assistance available for cross-reference and equivalent part identification