FOR ELECTROLUX WASHING MACHINE W4250N

The OEM Washing Machine Seal 88x125x12 CB NBR is designed for installation around the rotating drum shaft or bearing housing of compatible washing machines and industrial laundry equipment.

Its primary function is to create a controlled sealing contact around the shaft, helping prevent lubricant from escaping from the bearing area while limiting the entry of water, moisture, detergent residue, dirt, and external contamination.

The CB Profile is intended for radial shaft-sealing applications. The precise lip geometry and case configuration may vary according to the original manufacturer, so the actual profile should be compared with the existing seal before installation.

Manufactured from NBR (Nitrile Butadiene Rubber), the seal offers good resistance to:

Mineral-based lubricants

Bearing grease

Petroleum-based oils

General industrial lubricants

Moderate exposure to water and moisture

Wear and abrasion under compatible conditions

The dimensions 88 × 125 × 12 mm represent an 88 mm shaft diameter, 125 mm housing diameter, and 12 mm seal width. This size is suitable for compatible industrial washing machines, commercial laundry machines, extractors, drum-drive assemblies, and OEM laundry equipment.

Because washing-machine applications may involve water, detergent, heat, rotational movement, and shaft misalignment, the original seal profile, lip direction, shaft condition, and machine model should always be verified before replacement.

⚙️ Applications

Industrial washing machines

Commercial washing machines

Laundry equipment

Washing-machine drum shafts

Drum-bearing assemblies

Bearing housings

Laundry extractors

Drum-drive systems

Industrial cleaning equipment

OEM laundry machinery

🎯 Benefits

✔ Helps prevent lubricant leakage

✔ Reduces water and moisture entry

✔ Protects drum-shaft bearings

✔ Good resistance to oils and grease

✔ Durable NBR sealing material

✔ Suitable for rotating shaft applications

✔ Supports longer bearing service life

✔ Suitable for maintenance and overhaul work

✔ OEM replacement ready when dimensions and profile match

🧠 Technical Insight

CB Rotary Shaft Seal Profile

Metric Drum-Shaft Seal Design

NBR Sealing Material

Radial Shaft-Sealing Function

Bearing Lubricant Retention

Water and Contaminant Exclusion

Designed for Rotating Drum Assemblies

Profile Verification Required Before Installation

✅ Key Features

OEM Replacement Quality

CB Profile

88 mm Shaft Size

125 mm Housing Size

Premium NBR Material

Metric Seal Construction

Washing-Machine Shaft Application

Industrial Laundry Equipment Compatible

📊 Specifications

Brand: OEM

Product: Washing Machine Seal

Model: CB

Size: 88 × 125 × 12 mm

Type: Washing Machine Drum Shaft Seal / Rotary Shaft Seal

Material: NBR (Nitrile Butadiene Rubber)

Profile: CB

Construction: Elastomer Sealing Element with Reinforced Case

Lip Design: CB Profile Main Sealing Lip

Dust Lip: Verify against the actual seal profile

Spring Type: Verify against the actual seal construction

Shaft Diameter (ID): 88 mm

Housing Diameter (OD): 125 mm

Width: 12 mm

Pressure Capability: Suitable for low-pressure radial shaft-sealing service

Lubrication: Bearing Grease and Compatible Lubricating Oil

Temperature Range: Typically approximately -30°C to +100°C for standard NBR; actual limit depends on compound, detergent, and operating conditions

Application Class: Washing Machine & Laundry Equipment

Standard: Metric Rotary Shaft Seal

🔁 Equivalent

Suitable replacement for compatible:

Washing Machine Seal 88x125x12

CB 88x125x12 NBR Seal

Industrial Washing Machine Drum Seal

Commercial Laundry Machine Seal

Drum Shaft Bearing Seal

Laundry Extractor Shaft Seal

Metric Rotary Shaft Seal

OEM Washing Machine Oil Seal

Bearing Housing Seal

OEM CB Profile Seal

The same dimensions alone do not guarantee interchangeability. Different manufacturers may use different lip geometries, spring arrangements, outside-diameter constructions, and installation directions.

(Always verify dimensions, profile shape, lip direction, spring construction, shaft condition, detergent compatibility, rotational speed, and operating temperature before ordering.)

📦 Availability

✅ In Stock

🚚 Fast Delivery Available

🌎 Worldwide Shipping Available

📦 MOQ: 1 Piece

🏭 Suitable for industrial washing-machine repair, commercial laundry maintenance, drum-bearing replacement, laundry extractor servicing, and compatible OEM replacement applications.

📲 Contact via LINE ID: dusitrea

📧 Email: sales@seal4go.com

💬 Technical support available before ordering.

🔍 Assistance available for cross-reference and equivalent part identification.