The FP Oil Seal 5x15x6 TG NBR is designed for compact rotary shaft applications requiring dependable lubricant retention around a 5 mm shaft.

Installed between the rotating shaft and stationary housing, the sealing element creates controlled radial contact with the shaft surface. This helps reduce leakage of compatible oil or grease while limiting the entry of dust, dirt, moisture, and abrasive particles into bearings, motors, pumps, gear units, or other precision mechanical assemblies.

The product is identified by the FP manufacturer designation TG. Because seal-profile codes may vary between manufacturers and production series, the exact sealing-lip geometry, number of lips, outside-diameter construction, internal reinforcement, spring arrangement, dust-exclusion feature, and installation direction should be compared with the original seal or technical drawing before replacement.

Manufactured from NBR (Nitrile Butadiene Rubber), the sealing element is generally compatible with:

• Mineral oils
• Light gear oils
• Hydraulic oils
• Bearing grease
• Petroleum-based lubricants
• General industrial lubricating fluids

NBR provides good resistance to petroleum-based oils, grease, abrasion, and mechanical wear under standard operating conditions. Compatibility should be confirmed before use with aggressive chemicals, fuels, high continuous temperatures, ozone-rich environments, or specialized synthetic lubricants.

The metric dimensions are:

Shaft diameter: 5 mm

Housing diameter: 15 mm

Seal width: 6 mm

The compact 5 × 15 × 6 mm dimensions make this seal suitable for small shafts and restricted installation spaces. Because the shaft diameter is very small, shaft finish, concentricity, runout, lubrication, and careful installation are particularly important for reliable service life.

⚙️ Applications

• Small electric motors
• Precision pumps
• Miniature gearboxes
• Compact bearing housings
• Power tools
• Measuring instruments
• Small mechanical drives
• Automation equipment
• Precision machinery
• OEM rotating assemblies

🎯 Benefits

✔ Helps retain oil or compatible grease

✔ Protects small bearings and rotating components

✔ Oil-resistant NBR sealing material

✔ Suitable for 5 mm shaft assemblies

✔ Compact 15 mm outside diameter

✔ Good resistance to wear and abrasion

✔ Suitable for repair and maintenance work

✔ Designed for restricted installation spaces

✔ OEM replacement ready when dimensions and profile match

🧠 Technical Insight

• FP TG Seal Reference
• Compact Metric Rotary Shaft Seal
• NBR Sealing Material
• Radial Shaft-Sealing Function
• Low-Pressure Lubricant Retention
• Precision Small-Shaft Application
• 5 mm Shaft Diameter
• TG Cross-Section Verification Required

✅ Key Features

• FP Industrial Quality
• TG Profile Reference
• Oil-Resistant NBR Material
• Compact Rotary Shaft Construction
• Metric 5x15x6 mm Dimensions
• Suitable for Compatible Oil and Grease
• Precision Replacement Seal
• OEM Cross-Reference Ready

📊 Specifications

Brand: FP

Model: TG

Size: 5 × 15 × 6 mm

Type: Compact Metric Rotary Shaft Oil Seal

Material: NBR (Nitrile Butadiene Rubber)

Profile: TG

Construction: Manufacturer-Specific Reinforced Rotary Shaft-Seal Construction

Lip Design: TG profile; verify the exact geometry against the original seal

Dust Lip: Verify from the actual TG cross-section

Spring Type: Verify from the actual seal construction

Shaft Diameter (ID): 5 mm

Housing Diameter (OD): 15 mm

Width: 6 mm

Pressure Capability: Low-pressure rotary shaft-sealing service unless otherwise specified

Lubrication: Oil and compatible grease

Temperature Range: Typically approximately -30°C to +100°C for standard NBR; verify the actual compound and operating conditions

Application Class: Compact and Precision Rotating Equipment

Standard: Metric Industrial Seal

🔁 Equivalent

Suitable replacement for compatible:

• FP TG Rotary Shaft Seal
• FP 5x15x6 Oil Seal
• 5x15x6 NBR Oil Seal
• 5 mm Shaft Oil Seal
• Compact Metric Oil Seal
• Small Electric Motor Seal
• Precision Pump Shaft Seal
• Miniature Gearbox Seal
• OEM TG Shaft Seal
• Precision Rotary Shaft Seal

The same dimensions alone do not guarantee interchangeability. The replacement must match the original TG cross-section, lip geometry, lip orientation, outside construction, spring arrangement, reinforcement, installation direction, and material compound.

(Always verify dimensions, TG-profile geometry, lip direction, shaft finish, housing condition, installation depth, lubricant compatibility, rotational speed, temperature, runout, and operating conditions before ordering.)

📦 Availability

✅ In Stock

🚚 Fast Delivery Available

🌎 Worldwide Shipping Available

📦 MOQ: 1 Piece

🏭 Suitable for motor repair, precision-pump maintenance, miniature-gearbox servicing, bearing replacement, power-tool repair, automation equipment, and compatible OEM replacement applications.

📲 Contact via LINE ID: dusitrea

📧 Email: sales@seal4go.com

💬 Technical support available before ordering

🔍 Assistance available for cross-reference and equivalent part identification