The FP Oil Seal 60x100x13 G NBR is designed for industrial rotary shaft applications requiring dependable lubricant retention around a 60 mm shaft.

Installed between the rotating shaft and stationary housing, the sealing element creates controlled radial contact with the shaft surface. This helps reduce leakage of compatible oil or grease while protecting bearings, gearboxes, pumps, transmissions, and other internal rotating components from contamination.

The product is identified by the FP manufacturer designation G. Because industrial seal-profile codes may differ between manufacturers and production series, the exact sealing-lip geometry, number of lips, outside-diameter construction, internal reinforcement, spring arrangement, dust-exclusion feature, and installation direction should be compared with the original seal or technical drawing before replacement.

Manufactured from NBR (Nitrile Butadiene Rubber), the sealing element is generally compatible with:

• Mineral oils
• Gear oils
• Hydraulic oils
• Bearing grease
• Petroleum-based lubricants
• General industrial lubricating fluids

NBR provides good resistance to petroleum-based oils, grease, abrasion, and mechanical wear under standard industrial operating conditions. Compatibility should be confirmed before use with aggressive chemicals, fuels, high continuous temperatures, ozone-rich environments, or specialized synthetic lubricants.

The metric dimensions are:

Shaft diameter: 60 mm

Housing diameter: 100 mm

Seal width: 13 mm

The 60 × 100 × 13 mm dimensions make this seal suitable for medium-to-large bearing housings, gearboxes, pumps, transmissions, conveyor drives, and OEM rotating equipment. Accurate dimensional measurement and G-profile verification are essential before installation.

⚙️ Applications

• Industrial gearboxes
• Bearing housings
• Industrial pumps
• Mechanical transmissions
• Power transmission systems
• Agricultural machinery
• Construction equipment
• Conveyor drive assemblies
• General industrial machinery
• OEM rotating equipment

🎯 Benefits

✔ Helps retain oil or compatible grease

✔ Protects bearings and rotating components

✔ Oil-resistant NBR sealing material

✔ Suitable for 60 mm shaft assemblies

✔ Robust 13 mm axial width

✔ Good resistance to wear and abrasion

✔ Suitable for maintenance and overhaul work

✔ Supports longer bearing and component life

✔ OEM replacement ready when dimensions and profile match

🧠 Technical Insight

• FP G Seal Reference
• Metric Rotary Shaft Seal
• NBR Sealing Material
• Radial Shaft-Sealing Function
• Low-Pressure Lubricant Retention
• Medium-to-Large Industrial Application
• 60 mm Shaft Diameter
• G Cross-Section Verification Required

✅ Key Features

• FP Industrial Quality
• G Profile Reference
• Oil-Resistant NBR Material
• Reinforced Rotary Shaft Construction
• Metric 60x100x13 mm Dimensions
• Suitable for Compatible Oil and Grease
• Industrial Replacement Seal
• OEM Cross-Reference Ready

📊 Specifications

Brand: FP

Model: G

Size: 60 × 100 × 13 mm

Type: Industrial Rotary Shaft Oil Seal

Material: NBR (Nitrile Butadiene Rubber)

Profile: G

Construction: Manufacturer-Specific Reinforced Rotary Shaft-Seal Construction

Lip Design: G profile; verify the exact geometry against the original seal

Dust Lip: Verify from the actual G cross-section

Spring Type: Verify from the actual seal construction

Shaft Diameter (ID): 60 mm

Housing Diameter (OD): 100 mm

Width: 13 mm

Pressure Capability: Low-pressure rotary shaft-sealing service unless otherwise specified

Lubrication: Oil and compatible grease

Temperature Range: Typically approximately -30°C to +100°C for standard NBR; verify the actual compound, lubricant, speed, and operating conditions

Speed Consideration: Permissible speed depends on shaft diameter, surface finish, lubrication, temperature, alignment, and material compound

Application Class: Industrial Bearing and Rotating Equipment

Standard: Metric Industrial Seal

🔁 Equivalent

Suitable replacement for compatible:

• FP G Rotary Shaft Seal
• FP 60x100x13 Oil Seal
• 60x100x13 NBR Oil Seal
• 60 mm Shaft Oil Seal
• Metric NBR Rotary Shaft Seal
• Industrial Bearing Housing Seal
• Industrial Gearbox Shaft Seal
• Pump Shaft Oil Seal
• OEM G Shaft Seal
• General Industrial Rotary Seal

The same dimensions alone do not guarantee interchangeability. The replacement must match the original G cross-section, sealing-lip geometry, lip orientation, outside construction, reinforcement arrangement, spring configuration, installation direction, and material compound.

(Always verify dimensions, G-profile geometry, lip direction, shaft finish, housing condition, installation depth, lubricant compatibility, rotational speed, temperature, pressure, and operating conditions before ordering.)

📦 Availability

✅ In Stock

🚚 Fast Delivery Available

🌎 Worldwide Shipping Available

📦 MOQ: 1 Piece

🏭 Suitable for gearbox overhaul, bearing-housing maintenance, industrial pump repair, transmission servicing, conveyor-drive maintenance, agricultural machinery repair, and compatible OEM replacement applications.

📲 Contact via LINE ID: dusitrea

📧 Email: sales@seal4go.com

💬 Technical support available before ordering

🔍 Assistance available for cross-reference and equivalent part identification