

Seal4Go.Com One Stop Sealing Solution
Seal4Go.Com One Stop Sealing Solution
MRC (SKF) 200SZZ5 is a single-row deep groove ball bearing from the traditional MRC 200-S series.
The base 200S size corresponds to the standard modern 6200 dimensional family:
Bore: 10 mm
Outside Diameter: 30 mm
Width: 9 mm
The ZZ portion indicates a double-side shielded configuration. The trailing 5 appears to be an MRC-specific execution or special-feature code and should not be decoded or substituted without confirming the original MRC specification.
Current bearing listings identify MRC 200SZZ5 as a single-row ball bearing and distinguish it from standard 200SZZ as a separate catalog item.
The MRC 200SZZ5 is a compact single-row radial deep groove ball bearing designed primarily for radial load while also supporting moderate axial load in both directions.
Its dimensional envelope is:
10 × 30 × 9 mm
which corresponds to the modern standard:
6200
The bearing uses a double-shielded configuration, helping retain grease and reduce entry of dust and larger contaminants while maintaining relatively low friction.
Because 200SZZ5 is listed separately from 200SZZ, 200SZZ6, 200SZZ9, 200SZZC3 and other MRC executions, the final 5 should be treated as a manufacturer-specific special designation rather than assumed to mean clearance, grease, precision, or another feature. locateballbearings.com
⚙️ Applications
🎯 Benefits
✔ Compact 10 × 30 × 9 mm size
✔ Single-row deep groove design
✔ Double-side shielded configuration
✔ Good grease retention
✔ Low running friction
✔ Good radial-load capability
✔ Moderate axial-load capability in both directions
✔ Suitable for relatively high-speed machinery when operating conditions permit
✔ Modern 6200-series dimensional cross-reference options available
🧠 Technical Insight
✅ Key Features
📊 Specifications
Brand: MRC (SKF)
Model / Bearing Number: 200SZZ5
Series: MRC 200-S Series
Modern Dimensional Reference: 6200
Product Type: Deep Groove Ball Bearing
Bearing Type: Single-Row Radial Ball Bearing
Construction: Standard deep groove / non-filling-slot type
Bore Diameter (d): 10.00 mm
Outside Diameter (D): 30.00 mm
Width (B): 9.00 mm
Rolling Elements: Ball
Number of Rows: 1
Closure: Double-side shielded
ZZ Suffix: Double shielded
Suffix 5: Manufacturer-specific MRC execution; exact meaning should be verified from the original MRC catalog or bearing documentation
Primary Load: Radial
Axial Load Capability: Moderate axial load in both directions depending on operating conditions
Lubrication: Normally grease-retaining shielded-bearing configuration
Internal Clearance: Do not infer from suffix 5; verify separately
Cage: Verify actual MRC production specification
Dynamic Load Rating: Verify original MRC data or exact modern replacement specification
Static Load Rating: Verify original MRC data or exact modern replacement specification
Speed Rating: Depends on shield design, grease, clearance, fit, temperature, and load
Shaft Fit: Nominal 10 mm shaft
Housing Fit: Nominal 30 mm bearing seat
🔁 Equivalent
Suitable dimensional replacement or cross-reference candidates include:
The dimensional relationship is:
MRC 200SZZ5 = 10 × 30 × 9 mm
which matches:
6200
and the ZZ construction points toward the modern double-shielded family:
6200-2Z / 6200ZZ
However, the trailing:
5
is important.
Current MRC listings show 200SZZ5 as a separate part number from 200SZZ, confirming that the suffix represents some additional execution rather than simply repeating the standard ZZ configuration. locateballbearings.com
Therefore, a standard 6200-2Z should be treated as a dimensional cross-reference candidate, not an automatically exact replacement.
Both commonly use:
10 × 30 × 9 mm
but closure design differs.
6200-2Z / ZZ
6200-2RS / 2RSH
A sealed 6200-2RS should therefore not automatically replace MRC 200SZZ5.
Before replacing MRC 200SZZ5, verify:
(Always verify the special “5” execution on the original MRC 200SZZ5 before selecting SKF 6200-2Z, NTN 6200ZZ, NSK 6200ZZ, FAG 6200-2Z, or another replacement.)
📦 Availability
✅ In Stock
🚚 Fast Delivery Available
🌎 Worldwide Shipping Available
📦 MOQ: 1 Piece
🏭 Suitable for small electric motors, pumps, fans, gearboxes, power tools, rollers, conveyors, and general machinery requiring a 10x30x9 mm double-shielded deep groove ball bearing.
📲 Contact via LINE ID: dusitrea
📧 Email: sales@seal4go.com
💬 Technical support available before ordering
🔍 Assistance available for cross-reference and equivalent part identification
Specific References
No customer reviews for the moment.