

Seal4Go.Com One Stop Sealing Solution
Seal4Go.Com One Stop Sealing Solution
MRC (SKF) 202SZZ10 is a single-row deep groove radial ball bearing from the traditional MRC 200-S series.
The base 202S size corresponds to the modern 6202 dimensional family:
Bore: 15 mm
Outside Diameter: 35 mm
Width: 11 mm
The ZZ portion indicates a double-shielded configuration. The trailing 10 should be treated as an MRC-specific execution code and should not be assumed to represent clearance, grease, tolerance, or another feature unless confirmed from original MRC documentation.
🏷️ Title
MRC (SKF) 202SZZ10 Deep Groove Ball Bearing Price | 15x35x11 mm | Double Shielded | Special MRC Execution
🔧 Summary
MRC (SKF) 202SZZ10 is a single-row deep groove radial ball bearing from the traditional MRC 200-S series.
The base 202S size corresponds to the modern 6202 dimensional family:
Bore: 15 mm
Outside Diameter: 35 mm
Width: 11 mm
The ZZ portion indicates a double-shielded configuration. The trailing 10 should be treated as an MRC-specific execution code and should not be assumed to represent clearance, grease, tolerance, or another feature unless confirmed from original MRC documentation.
📘 Description
The MRC 202SZZ10 is a compact deep groove ball bearing intended primarily for radial loading while also accommodating moderate axial loads in both directions.
Its basic dimensional envelope is:
15 × 35 × 11 mm
which corresponds to the standard modern bearing family:
6202
The double-shield arrangement helps retain grease and reduce contamination ingress while maintaining relatively low friction compared with a contact rubber-sealed bearing.
Because the designation contains the special suffix 10, a standard 6202ZZ should be treated as a dimensional and constructional cross-reference candidate rather than an automatically exact equivalent.
⚙️ Applications
🎯 Benefits
✔ Standard 15 × 35 × 11 mm dimensional envelope
✔ Single-row deep groove construction
✔ Double-shielded configuration
✔ Good grease retention
✔ Low running friction
✔ Good radial-load capability
✔ Supports moderate axial load in both directions
✔ Suitable for relatively high-speed applications when conditions permit
✔ Modern 6202-series cross-reference options available
🧠 Technical Insight
✅ Key Features
📊 Specifications
Brand: MRC (SKF)
Model / Bearing Number: 202SZZ10
Series: MRC 200-S Series
Modern Dimensional Reference: 6202
Product Type: Deep Groove Ball Bearing
Bearing Type: Single-Row Radial Ball Bearing
Construction: Standard deep groove / non-filling-slot type
Bore Diameter (d): 15.00 mm
Outside Diameter (D): 35.00 mm
Width (B): 11.00 mm
Rolling Elements: Ball
Number of Rows: 1
Closure: Double-side shielded
ZZ Suffix: Double shield
Suffix 10: Manufacturer-specific MRC execution; exact meaning should be verified from original MRC documentation
Primary Load: Radial
Axial Load Capability: Moderate axial load in both directions depending on operating conditions
Lubrication: Normally grease-retaining shielded-bearing configuration
Internal Clearance: Do not infer from suffix 10; verify separately
Cage: Verify original MRC / production specification
Dynamic Load Rating: Verify original MRC data or exact modern replacement specification
Static Load Rating: Verify original MRC data or exact modern replacement specification
Speed Rating: Depends on shield design, grease, internal clearance, shaft/housing fits, temperature, and load
Shaft Fit: Nominal 15 mm shaft
Housing Fit: Nominal 35 mm bearing seat
🔁 Equivalent
Suitable dimensional replacement or cross-reference candidates include:
The basic dimensional relationship is:
MRC 202SZZ10 = 15 × 35 × 11 mm
which corresponds to:
6202
The ZZ execution points toward the modern:
6202-2Z / 6202ZZ
family.
However, the final:
10
should not be ignored.
It should be treated as a special MRC execution code until the exact feature is confirmed.
Therefore:
MRC 202SZZ10 ≠ automatically standard 6202-2Z
even though the principal dimensions and shield arrangement may match.
Both commonly share:
15 × 35 × 11 mm
but use different closures.
6202-2Z / ZZ
6202-2RS / 2RSH
Therefore, 6202-2RS should not automatically replace MRC 202SZZ10 solely because the dimensions match.
Before replacing MRC 202SZZ10, verify:
(Always verify the special “10” execution on the original MRC 202SZZ10 before selecting SKF 6202-2Z, FAG 6202-2Z, NTN 6202ZZ, NSK 6202ZZ, or another replacement.)
📦 Availability
✅ In Stock
🚚 Fast Delivery Available
🌎 Worldwide Shipping Available
📦 MOQ: 1 Piece
🏭 Suitable for small electric motors, pumps, fans, gearboxes, power tools, rollers, light conveyors, and general machinery requiring a 15x35x11 mm double-shielded deep groove ball bearing.
📲 Contact via LINE ID: dusitrea
📧 Email: sales@seal4go.com
💬 Technical support available before ordering
🔍 Assistance available for cross-reference and equivalent part identification
Specific References
No customer reviews for the moment.