MRC (SKF) 208SZ Deep Groove Ball Bearing Price | 40x80x18 mm | Single Shielded | 6208-Z Equivalent
      MRC (SKF) 208SZ Deep Groove Ball Bearing Price | 40x80x18 mm | Single Shielded | 6208-Z Equivalent

      MRC (SKF) 208SZ Deep Groove Ball Bearing Price | 40x80x18 mm | Single Shielded | 6208-Z Equivalent

      Review (0)

      MRC (SKF) 208SZ is a single-row deep groove radial ball bearing from the traditional MRC 200-S Series.

      Basic dimensions:

      Bore: 40 mm
      Outside Diameter: 80 mm
      Width: 18 mm

      The dimensional envelope corresponds to the modern 6208 bearing family.

      In the MRC designation, Z indicates a single-side shielded execution, so the closest modern constructional reference is generally the 6208-Z / 6208Z family, subject to confirmation of the original bearing.

      • Security policySecurity policy
      • Delivery policyDelivery policy
      • Return policyReturn policy

      The MRC 208SZ is a single-row deep groove ball bearing designed primarily for radial loads while also supporting moderate axial loads in both directions.

      Its standard mounting envelope is:

      40 × 80 × 18 mm

      which corresponds dimensionally to:

      6208

      The bearing uses a conventional non-filling-slot / Conrad-type deep groove construction.

      The Z suffix indicates that the bearing is protected by a metal shield on one side, while the opposite side remains open.

      This configuration is useful where one side requires contamination protection and grease retention while the other side requires access to lubrication or integration into the machine’s lubrication system.

      ⚙️ Applications

      • Electric motors
      • Pumps
      • Fans and blowers
      • Gearboxes
      • Conveyor systems
      • Industrial rollers
      • Agricultural machinery
      • Processing equipment
      • Power-transmission systems
      • General rotating machinery

      🎯 Benefits

      ✔ Standard 40 × 80 × 18 mm dimensions

      ✔ Single-row deep groove construction

      ✔ Single-side metal shield

      ✔ Good grease retention on the shielded side

      ✔ Lower friction than contact rubber-sealed bearings

      ✔ Good radial-load capability

      ✔ Supports moderate axial load in both directions

      ✔ Suitable for a wide range of industrial applications

      ✔ Modern 6208-Z cross-reference options are widely available

      🧠 Technical Insight

      • MRC 208SZ
      • MRC 200-S Series
      • Deep Groove Ball Bearing
      • 40 mm Bore
      • 80 mm Outside Diameter
      • 18 mm Width
      • Single Shielded
      • Z = One Metal Shield
      • Non-Filling-Slot / Conrad Type
      • Modern Dimensional Reference: 6208

      ✅ Key Features

      • MRC (SKF) Bearing
      • Model 208SZ
      • 200-S Series
      • Single-Row Deep Groove Ball Bearing
      • 40 mm Bore
      • 80 mm OD
      • 18 mm Width
      • Single Metal Shield

      📊 Specifications

      Brand: MRC (SKF)

      Model / Bearing Number: 208SZ

      Series: MRC 200-S Series

      Modern Dimensional Reference: 6208

      Product Type: Deep Groove Ball Bearing

      Bearing Type: Single-Row Radial Ball Bearing

      Construction: Standard Deep Groove / Non-Filling-Slot / Conrad Type

      Bore Diameter (d): 40.00 mm

      Outside Diameter (D): 80.00 mm

      Width (B): 18.00 mm

      Rolling Elements: Ball

      Number of Rows: 1

      Closure: Single Shielded

      Z Suffix: One metal shield

      Opposite Side: Open

      Primary Load: Radial

      Axial Load Capability: Moderate axial load in both directions depending on operating conditions

      Lubrication: Shield helps retain grease on one side; lubrication arrangement should match the machine design

      Internal Clearance: Not defined by the basic 208SZ designation; verify Normal, C3, or another clearance if required

      Cage: Verify original MRC production specification

      Dynamic Load Rating: Verify original MRC or exact modern replacement data

      Static Load Rating: Verify original MRC or exact modern replacement data

      Speed Rating: Depends on shield design, lubricant, internal clearance, shaft/housing fit, temperature, and load

      Shaft Fit: Nominal 40 mm shaft

      Housing Fit: Nominal 80 mm bearing seat

      🔁 Equivalent

      Suitable dimensional replacement or cross-reference candidates include:

      • MRC 208SZ
      • SKF 6208-Z
      • SKF 6208Z
      • FAG 6208-Z
      • NSK 6208Z
      • NTN 6208Z
      • KOYO 6208Z
      • NACHI 6208ZE
      • 40x80x18 Single-Shielded Deep Groove Ball Bearing

      MRC 208SZ → Modern 6208-Z Family

      The dimensional relationship is:

      MRC 208SZ = 40 × 80 × 18 mm

      which corresponds to:

      6208

      Because the MRC suffix is:

      Z

      the most relevant modern constructional family is:

      6208-Z / 6208Z

      rather than 6208-2Z.

      208SZ vs 208SFF

      Both may have the same basic dimensions:

      40 × 80 × 18 mm

      but the closure differs.

      208SZ

      • Single metal shield
      • One side shielded
      • One side open

      208SFF

      • Double-side protected execution
      • Typically associated with shielding on both sides

      Therefore, they should not automatically be interchanged.

      6208-Z vs 6208-2Z vs 6208-2RS

      6208-Z

      • One metal shield
      • One side open
      • Low friction
      • Suitable where one side needs open lubrication access

      6208-2Z / ZZ

      • Metal shields on both sides
      • Better grease retention
      • More protection from dust and debris

      6208-2RS / 2RSH

      • Rubber seals on both sides
      • Better fine-dust and moisture exclusion
      • Higher friction
      • Usually lower allowable speed

      Therefore, the closest constructional replacement for MRC 208SZ is generally 6208-Z, not 6208-2Z or 6208-2RS.

      Important Cross-Reference Consideration

      Before replacing MRC 208SZ, verify:

      • Bore = 40 mm
      • OD = 80 mm
      • Width = 18 mm
      • Single metal shield
      • Shield orientation if machine-specific
      • Internal clearance
      • Cage
      • Lubrication
      • Precision class
      • Operating speed
      • Load requirement
      • Shaft fit
      • Housing fit

      (Always verify the original MRC 208SZ bearing and shield orientation before selecting SKF 6208-Z, FAG 6208-Z, NTN 6208Z, NSK 6208Z, or another replacement.)

      📦 Availability

      ✅ In Stock

      🚚 Fast Delivery Available

      🌎 Worldwide Shipping Available

      📦 MOQ: 1 Piece

      🏭 Suitable for electric motors, pumps, fans, gearboxes, conveyors, rollers, agricultural machinery, processing equipment, and general industrial machinery requiring a 40x80x18 mm single-shielded deep groove ball bearing.

      📲 Contact via LINE ID: dusitrea

      📧 Email: sales@seal4go.com

      💬 Technical support available before ordering

      🔍 Assistance available for cross-reference and equivalent part identification

      MRC-SKF-208SZ

      Data sheet

      Inside Diameter (I.D.) - m.m.
      Outside Diameter (O.D.) - m.m.
      Thickness - m.m.
      Material
      BEARING STEEL
      Cover Material
      BEARING STEEL
      Brand
      MRC(SKF)-USA
      Item Condition
      New

      Specific References

      No customer reviews for the moment.

      Write your review
      MRC (SKF) 208SZ Deep Groove Ball Bearing Price | 40x80x18 mm | Single Shielded | 6208-Z Equivalent
      MRC 208SZ Ball Bearing

      MRC (SKF) 208SZ Deep Groove Ball Bearing Price | 40x80x18 mm | Single Shielded | 6208-Z Equivalent