OIL SEAL TROSTEL 1.594x2.375x0.250 LGS NBR Price | Compact Inch-Size Rotary Shaft Seal for Bearings & Industrial Machinery
      OIL SEAL TROSTEL 1.594x2.375x0.250 LGS NBR Price | Compact Inch-Size Rotary Shaft Seal for Bearings & Industrial Machinery
      OIL SEAL TROSTEL 1.594x2.375x0.250 LGS NBR Price | Compact Inch-Size Rotary Shaft Seal for Bearings & Industrial Machinery

      OIL SEAL TROSTEL 1.594x2.375x0.250 LGS NBR Price | Compact Inch-Size Rotary Shaft Seal for Bearings & Industrial Machinery

      Review (0)

      TROSTEL Oil Seal 1.594x2.375x0.250 LGS NBR is a compact inch-size industrial rotary shaft seal designed for bearing housings, gearboxes, pumps, mechanical transmissions, agricultural machinery, construction equipment, conveyor systems, and general rotating equipment. Identified by the manufacturer-specific LGS Profile, this seal uses oil-resistant NBR (Nitrile Butadiene Rubber) to help retain oil or compatible grease while protecting internal components from lubricant leakage and external contamination.

      • Security policySecurity policy
      • Delivery policyDelivery policy
      • Return policyReturn policy

      The TROSTEL Oil Seal 1.594x2.375x0.250 LGS NBR is designed for industrial rotary shaft applications requiring dependable lubricant retention around a 1.594-inch shaft.

      Installed between the rotating shaft and stationary housing, the sealing element creates controlled radial contact with the shaft surface. This helps reduce leakage of oil or compatible grease while limiting the entry of dust, dirt, moisture, and abrasive particles into the bearing, gearbox, pump, transmission, or drive assembly.

      The product is identified by the TROSTEL manufacturer designation LGS. Because industrial seal-profile codes may vary between manufacturers and production series, the exact sealing-lip geometry, number of lips, outside-case construction, internal reinforcement, spring arrangement, dust-exclusion feature, and installation direction should be compared with the original seal or technical drawing before replacement.

      Manufactured from NBR (Nitrile Butadiene Rubber), the sealing element is generally compatible with:

      • Mineral oils
      • Gear oils
      • Hydraulic oils
      • Bearing grease
      • Petroleum-based lubricants
      • General industrial lubricating fluids

      NBR provides good resistance to petroleum-based oils, grease, abrasion, and mechanical wear under standard industrial operating conditions. Compatibility should be confirmed before use with aggressive chemicals, high continuous temperatures, ozone-rich environments, or specialized synthetic lubricants.

      The inch dimensions correspond approximately to:

      Shaft diameter: 1.594 inches or 40.49 mm

      Housing diameter: 2.375 inches or 60.33 mm

      Seal width: 0.250 inch or 6.35 mm

      The narrow 0.250-inch axial width makes this seal suitable for compact bearing housings, gearboxes, pumps, transmissions, and OEM machinery where installation space is limited. Accurate dimensional measurement and LGS-profile verification are essential before installation.

      ⚙️ Applications

      • Industrial gearboxes
      • Bearing housings
      • Industrial pumps
      • Mechanical transmissions
      • Power transmission systems
      • Agricultural machinery
      • Construction equipment
      • Conveyor drive assemblies
      • Legacy industrial equipment
      • OEM rotating machinery

      🎯 Benefits

      ✔ Helps retain oil or compatible grease

      ✔ Protects bearings and rotating components

      ✔ Oil-resistant NBR sealing material

      ✔ Suitable for 1.594-inch shaft assemblies

      ✔ Compact 0.250-inch axial width

      ✔ Good resistance to wear and abrasion

      ✔ Suitable for maintenance and overhaul work

      ✔ Supports longer bearing service life

      ✔ OEM replacement ready when dimensions and profile match

      🧠 Technical Insight

      • TROSTEL LGS Seal Reference
      • Inch-Size Rotary Shaft Seal
      • NBR Sealing Material
      • Radial Shaft-Sealing Function
      • Low-Pressure Lubricant Retention
      • Compact Axial Seal Width
      • Approximately 40.49 mm Shaft Diameter
      • LGS Profile Verification Required

      ✅ Key Features

      • TROSTEL Industrial Quality
      • LGS Profile Reference
      • Reinforced Rotary Shaft Construction
      • Oil-Resistant NBR Material
      • Inch-Size 1.594x2.375x0.250 Dimensions
      • Suitable for Compatible Oil and Grease
      • Industrial Replacement Seal
      • OEM Cross-Reference Ready

      📊 Specifications

      Brand: TROSTEL

      Model: LGS

      Size: 1.594 × 2.375 × 0.250 inch

      Metric Equivalent: Approximately 40.49 × 60.33 × 6.35 mm

      Type: Industrial Rotary Shaft Oil Seal

      Material: NBR (Nitrile Butadiene Rubber)

      Profile: LGS

      Construction: Manufacturer-Specific Reinforced Rotary Shaft-Seal Construction

      Lip Design: LGS profile; verify against the original seal

      Dust Lip: Verify from the actual LGS cross-section

      Spring Type: Verify from the actual seal construction

      Shaft Diameter (ID): 1.594 inches / approximately 40.49 mm

      Housing Diameter (OD): 2.375 inches / approximately 60.33 mm

      Width: 0.250 inch / approximately 6.35 mm

      Pressure Capability: Low-pressure rotary shaft-sealing service unless otherwise specified

      Lubrication: Oil and compatible grease

      Temperature Range: Typically approximately -30°C to +100°C for standard NBR; verify the actual compound and operating conditions

      Application Class: Industrial Bearing and Rotating Equipment

      Standard: Inch-Size Industrial Seal

      🔁 Equivalent

      Suitable replacement for compatible:

      • TROSTEL LGS Rotary Shaft Seal
      • 1.594x2.375x0.250 Oil Seal
      • 40.49x60.33x6.35 Rotary Seal
      • 1.594-Inch Shaft Oil Seal
      • Inch-Size NBR Oil Seal
      • Industrial Bearing Housing Seal
      • Industrial Gearbox Shaft Seal
      • Pump Shaft Oil Seal
      • OEM LGS Shaft Seal
      • Industrial Rotary Shaft Seal

      The same dimensions alone do not guarantee interchangeability. The replacement must match the original LGS cross-section, lip orientation, outside-case construction, spring arrangement, internal reinforcement, and material compound.

      (Always verify dimensions, LGS-profile geometry, lip direction, spring construction, shaft and housing condition, lubricant compatibility, rotational speed, temperature, and operating conditions before ordering.)

      📦 Availability

      ✅ In Stock

      🚚 Fast Delivery Available

      🌎 Worldwide Shipping Available

      📦 MOQ: 1 Piece

      🏭 Suitable for gearbox overhaul, bearing-housing maintenance, pump repair, transmission servicing, agricultural machinery maintenance, legacy-equipment restoration, and compatible OEM replacement applications.

      📲 Contact via LINE ID: dusitrea

      📧 Email: sales@seal4go.com

      💬 Technical support available before ordering

      🔍 Assistance available for cross-reference and equivalent part identification

      TROSTEL-1.594X2.375X0.250-LGS-NBR-A-86344

      Data sheet

      Inside Diameter (I.D.) - inch
      1.594
      Outside Diameter (O.D.) - inch
      2.375
      Thinkness - inch
      0.250
      Material
      NBR
      Cover Material
      CARBON STEEL
      Standard Type
      LGS
      Brand
      TROSTEL-USA
      Item Condition
      New

      Specific References

      No customer reviews for the moment.

      TROSTEL Oil Seal 1.594x2.375x0.250 LGS NBR

      OIL SEAL TROSTEL 1.594x2.375x0.250 LGS NBR Price | Compact Inch-Size Rotary Shaft Seal for Bearings & Industrial Machinery