The FP Oil Seal 140x170x12 GP NBR is engineered for rotary shaft applications requiring dependable lubricant retention and protection against contaminants. It is suitable for industrial gearboxes, pumps, large electric motors, bearing housings, power transmission systems, conveyors, and compatible OEM machinery.

The GP Profile generally features a primary sealing lip supported by a garter spring together with an auxiliary dust lip. The primary lip maintains controlled radial contact against the rotating shaft to retain oil or compatible grease, while the secondary lip helps reduce the entry of dust, dirt, moisture, and abrasive particles.

The reinforced outer construction provides dimensional stability and supports secure installation within the housing bore. Depending on the manufacturer’s specific GP design, the outside diameter may be rubber covered to improve static sealing and accommodate minor housing-surface irregularities.

Manufactured from NBR (Nitrile Butadiene Rubber), this oil seal is generally compatible with:

• Mineral oils
• Gear oils
• Hydraulic oils
• Bearing grease
• Petroleum-based lubricants
• General industrial lubricating fluids

NBR provides good resistance to oils, abrasion, and wear under standard industrial operating conditions. Compatibility should be confirmed before use with aggressive chemicals, high continuous temperatures, ozone-rich environments, or specialized synthetic lubricants.

With dimensions of 140 × 170 × 12 mm, this oil seal is commonly installed in industrial gearboxes, pumps, large motors, bearing housings, conveyor drives, agricultural machinery, construction equipment, and OEM rotating systems.

⚙️ Applications

• Industrial gearboxes
• Large electric motors
• Industrial pumps
• Bearing housings
• Conveyor drive systems
• Power transmission equipment
• Agricultural machinery
• Construction machinery
• Industrial fans and blowers
• OEM rotating machinery

🎯 Benefits

✔ Helps prevent oil and grease leakage

✔ Double-lip contamination protection

✔ Protects shafts and bearing assemblies

✔ Good resistance to mineral oils and grease

✔ Spring-loaded primary sealing lip

✔ Auxiliary dust-exclusion lip

✔ Suitable for large metric shafts

✔ Supports longer equipment service life

✔ OEM replacement ready when dimensions and profile match

🧠 Technical Insight

• GP Double Lip Profile
• Spring-Loaded Main Sealing Lip
• Auxiliary Dust Lip
• Reinforced Rotary Shaft Seal Construction
• NBR Oil-Resistant Compound
• Radial Shaft-Sealing Function
• Designed for Low-Pressure Lubricant Retention
• GP Profile Verification Recommended

✅ Key Features

• FP Industrial Quality
• GP Profile
• Double Lip Construction
• Garter Spring Main Lip
• Oil-Resistant NBR Material
• Large Metric Dimensions
• Industrial Replacement Seal
• OEM Cross-Reference Ready

📊 Specifications

Brand: FP

Model: GP

Size: 140 × 170 × 12 mm

Type: Rotary Shaft Oil Seal

Material: NBR (Nitrile Butadiene Rubber)

Profile: GP

Construction: Reinforced Rotary Shaft Seal Construction

Lip Design: Main Sealing Lip + Auxiliary Dust Lip

Dust Lip: Yes

Spring Type: Garter Spring

Shaft Diameter (ID): 140 mm

Housing Diameter (OD): 170 mm

Width: 12 mm

Pressure Capability: Low-pressure rotary shaft-sealing service

Lubrication: Oil and compatible grease

Temperature Range: Typically approximately -30°C to +100°C for standard NBR; verify the actual compound and operating conditions

Application Class: General and Heavy Industrial Equipment

Standard: Metric Rotary Shaft Seal

🔁 Equivalent

Suitable replacement for compatible:

• FP GP 140x170x12 Oil Seal
• GP 140x170x12 NBR Seal
• TC 140x170x12 NBR Oil Seal
• BASL 140x170x12 Rotary Shaft Seal
• SKF 140x170x12 Oil Seal
• NOK 140x170x12 Oil Seal
• Freudenberg 140x170x12 Seal
• CFW Rotary Shaft Seal
• DICHTOMATIK Oil Seal
• OEM Double Lip Rotary Shaft Seal

The same dimensions alone do not guarantee interchangeability. The replacement seal must match the original GP cross-section, lip orientation, outside-diameter construction, spring arrangement, and material compound.

(Always verify dimensions, GP profile geometry, lip direction, spring construction, shaft condition, lubricant compatibility, rotational speed, temperature, and operating conditions before ordering.)

📦 Availability

✅ In Stock

🚚 Fast Delivery Available

🌎 Worldwide Shipping Available

📦 MOQ: 1 Piece

🏭 Suitable for gearbox overhaul, pump maintenance, motor repair, bearing-housing service, conveyor maintenance, agricultural machinery repair, and compatible OEM replacement applications.

📲 Contact via LINE ID: dusitrea

📧 Email: sales@seal4go.com

💬 Technical support available before ordering

🔍 Assistance available for cross-reference and equivalent part identification