The TROSTEL Oil Seal 1.500x2.189x0.250 LGS NBR is intended for industrial rotary shaft applications requiring lubricant retention around a 1.500-inch shaft.

Installed between a rotating shaft and stationary housing, the sealing element creates controlled radial contact with the shaft surface. This helps reduce leakage of compatible oil or grease while protecting bearings, gears, pumps, transmissions, and other internal rotating components from dust, moisture, and external contaminants.

The product is identified by the TROSTEL manufacturer designation LGS. This is a manufacturer-specific profile code. The exact sealing-lip geometry, number of lips, dust-exclusion arrangement, outside-case construction, internal reinforcement, spring configuration, lip orientation, and installation direction should be verified against the original seal, technical drawing, or equipment specification before replacement.

Manufactured from NBR (Nitrile Butadiene Rubber), the sealing element is generally suitable for:

• Mineral oils
• Gear oils
• Hydraulic oils
• Bearing grease
• Petroleum-based lubricants
• General industrial lubricating fluids

NBR provides good resistance to petroleum-based oils, grease, abrasion, and mechanical wear under standard industrial operating conditions. Compatibility should be verified before use with aggressive chemicals, fuels, high continuous temperatures, ozone-rich environments, or specialized synthetic lubricants.

The inch dimensions convert approximately to:

Shaft diameter: 1.500 inches or 38.10 mm

Housing diameter: 2.189 inches or approximately 55.60 mm

Seal width: 0.250 inch or 6.35 mm

The 1.500 × 2.189 × 0.250-inch configuration is suitable for compact bearing housings, industrial gearboxes, pumps, transmissions, conveyor drives, and legacy machinery using an inch-size shaft-sealing arrangement.

⚙️ Applications

• Industrial gearboxes
• Bearing housings
• Industrial pumps
• Mechanical transmissions
• Power transmission systems
• Agricultural machinery
• Construction equipment
• Conveyor drive assemblies
• Legacy industrial equipment
• OEM rotating machinery

🎯 Benefits

✔ Helps retain compatible oil or grease

✔ Protects bearings and internal components

✔ Oil-resistant NBR sealing material

✔ Suitable for 1.500-inch shaft assemblies

✔ Manufacturer-specific TROSTEL LGS profile

✔ Good resistance to abrasion and wear

✔ Compact 0.250-inch seal width

✔ Suitable for maintenance and overhaul work

✔ Replacement ready when dimensions and profile match

🧠 Technical Insight

• TROSTEL LGS Seal Reference
• Inch-Size Rotary Shaft Seal
• NBR Sealing Material
• Manufacturer-Specific LGS Profile
• Radial Shaft-Sealing Function
• Low-Pressure Lubricant Retention
• 38.10 mm Shaft Diameter
• Exact LGS Cross-Section Must Be Verified

✅ Key Features

• TROSTEL Industrial Quality
• LGS Profile Reference
• Oil-Resistant NBR Material
• Inch-Size Construction
• 1.500x2.189x0.250 Dimensions
• Suitable for Compatible Oil and Grease
• Industrial Replacement Seal
• Cross-Reference Support Available

📊 Specifications

Brand: TROSTEL

Model / Profile: LGS

Size: 1.500 × 2.189 × 0.250 inch

Metric Equivalent: Approximately 38.10 × 55.60 × 6.35 mm

Type: Industrial Rotary Shaft Oil Seal

Material: NBR (Nitrile Butadiene Rubber)

Profile: LGS

Construction: Manufacturer-Specific TROSTEL LGS Rotary Shaft-Seal Construction

Lip Design: LGS profile; verify the exact sealing-lip geometry and orientation against the original seal or technical drawing

Dust Lip: Verify from the actual LGS cross-section

Spring Type: Verify from the actual seal construction

Shaft Diameter (ID): 1.500 inches / 38.10 mm

Housing Diameter (OD): 2.189 inches / approximately 55.60 mm

Width: 0.250 inch / 6.35 mm

Pressure Capability: Low-pressure rotary shaft-sealing service unless otherwise specified

Lubrication: Compatible oil and grease

Temperature Range: Typically approximately -30°C to +100°C for standard NBR; verify the actual compound, lubricant, shaft speed, and operating conditions

Speed Consideration: Permissible speed depends on shaft diameter, surface finish, lubrication, temperature, alignment, runout, and material compound

Application Class: Industrial Bearing and Rotating Equipment

Standard: Inch-Size Specialized Industrial Seal

🔁 Equivalent

Suitable replacement or cross-reference candidate for compatible:

• TROSTEL LGS NBR Rotary Shaft Seal
• TROSTEL 1.500x2.189x0.250 Oil Seal
• 38.10x55.60x6.35 Rotary Seal
• 1.500-Inch Shaft Oil Seal
• Inch-Size NBR Rotary Shaft Seal
• Compact Bearing Housing Seal
• Industrial Gearbox Shaft Seal
• Industrial Pump Shaft Seal
• OEM LGS Profile Oil Seal
• Industrial NBR Shaft Seal

The same dimensions alone do not guarantee interchangeability. The replacement must match the original LGS cross-section, sealing-lip geometry, lip orientation, outside-case construction, reinforcement arrangement, spring configuration, installation direction, material compound, and operating requirements.

(Always verify dimensions, LGS-profile geometry, lip direction, shaft finish, housing condition, installation depth, lubricant compatibility, rotational speed, temperature, runout, pressure, and operating conditions before ordering.)

📦 Availability

✅ In Stock

🚚 Fast Delivery Available

🌎 Worldwide Shipping Available

📦 MOQ: 1 Piece

🏭 Suitable for gearbox overhaul, bearing-housing maintenance, industrial pump repair, transmission servicing, agricultural-machinery repair, construction-equipment maintenance, conveyor-drive servicing, legacy-equipment restoration, and compatible OEM replacement applications.

📲 Contact via LINE ID: dusitrea

📧 Email: sales@seal4go.com

💬 Technical support available before ordering

🔍 Assistance available for cross-reference and equivalent part identification