MRC (SKF) 106KSFF Deep Groove Ball Bearing Price | 30x55x13 mm | Extra Light Series | Double Shielded
      MRC (SKF) 106KSFF Deep Groove Ball Bearing Price | 30x55x13 mm | Extra Light Series | Double Shielded

      MRC (SKF) 106KSFF Deep Groove Ball Bearing Price | 30x55x13 mm | Extra Light Series | Double Shielded

      Review (0)

      MRC (SKF) 106KSFF is a single-row deep groove radial ball bearing from the traditional MRC 100-KS Extra Light Series.

      Its standard dimensions are:

      Bore: 30 mm
      Outside Diameter: 55 mm
      Width: 13 mm

      The dimensional equivalent in the modern international bearing system is the 6006 family.

      The FF suffix in this MRC bearing family is generally associated with a double-side protected / double metal shielded execution, making the most relevant modern cross-reference family 6006-2Z / 6006ZZ, subject to verification of the original bearing.

      • Security policySecurity policy
      • Delivery policyDelivery policy
      • Return policyReturn policy

      The MRC 106KSFF is an extra-light-series deep groove ball bearing designed primarily for radial loading while also supporting moderate axial load in both directions.

      Its dimensional envelope is:

      30 × 55 × 13 mm

      which corresponds to the standard modern bearing size:

      6006

      Compared with a plain MRC 106, the 106KSFF designation identifies a specific protected execution in the MRC KS family, with FF typically indicating protection on both sides, commonly metal shields.

      This helps retain grease and reduce contamination ingress while maintaining lower friction than a typical contact rubber-sealed bearing.

      ⚙️ Applications

      • Electric motors
      • Pumps
      • Fans and blowers
      • Gearboxes
      • Industrial machinery
      • Light-duty conveyors
      • Agricultural equipment
      • Industrial rollers
      • Power-transmission equipment
      • General rotating machinery

      🎯 Benefits

      ✔ Standard 30 × 55 × 13 mm dimensions

      ✔ Extra-light-series construction

      ✔ Single-row deep groove design

      ✔ Good radial-load capability

      ✔ Moderate axial-load capability in both directions

      ✔ Double-side protection

      ✔ Lower sealing friction than typical contact rubber seals

      ✔ Suitable for relatively high-speed applications when conditions permit

      ✔ Modern 6006-series replacements are widely available

      🧠 Technical Insight

      • MRC 106KSFF
      • MRC 100-KS Extra Light Series
      • Deep Groove Ball Bearing
      • 30 mm Bore
      • 55 mm Outside Diameter
      • 13 mm Width
      • Non-Filling-Slot / Conrad-Type Bearing
      • FF Double-Side Protected Execution
      • Modern Dimensional Reference: 6006

      ✅ Key Features

      • MRC (SKF) Bearing
      • Model 106KSFF
      • Extra Light Series
      • Single-Row Deep Groove Ball Bearing
      • 30 mm Bore
      • 55 mm OD
      • 13 mm Width
      • Double-Shielded-Type Configuration

      📊 Specifications

      Brand: MRC (SKF)

      Model / Bearing Number: 106KSFF

      Series: MRC 100-KS Extra Light Series

      Modern Dimensional Reference: 6006

      Product Type: Deep Groove Ball Bearing

      Bearing Type: Single-Row Radial Ball Bearing

      Construction: Non-Filling-Slot / Conrad-Type Deep Groove Bearing

      Bore Diameter (d): 30.00 mm

      Outside Diameter (D): 55.00 mm

      Width (B): 13.00 mm

      Rolling Elements: Ball

      Number of Rows: 1

      Primary Load: Radial

      Axial Load Capability: Moderate axial load in both directions depending on operating conditions

      Closure: Protected on both sides

      FF Suffix: Typically associated with double metal shields in this MRC family; verify the physical bearing if closure construction is critical

      Lubrication: Normally grease-retaining protected-bearing configuration

      Internal Clearance: Not defined by the basic 106KSFF designation; verify Normal, C3, or other clearance if required

      Cage: Verify original MRC / production specification

      Dynamic Load Rating: Verify original MRC or corresponding modern manufacturer data

      Static Load Rating: Verify original MRC or corresponding modern manufacturer data

      Speed Rating: Depends on shield construction, lubricant, clearance, fits, temperature, and load

      Shaft Fit: Nominal 30 mm shaft

      Housing Fit: Nominal 55 mm bearing seat

      🔁 Equivalent

      Suitable dimensional replacement or cross-reference candidates include:

      • MRC 106KSFF
      • SKF 6006-2Z
      • SKF 6006-ZZ
      • FAG 6006-2Z
      • NSK 6006ZZ
      • NTN 6006ZZ
      • KOYO 6006ZZ
      • NACHI 6006ZZ
      • 30x55x13 Double-Shielded Deep Groove Ball Bearing

      MRC 106KSFF → Modern 6006 Family

      The key dimensional relationship is:

      MRC 106KSFF = 30 × 55 × 13 mm

      which corresponds to:

      6006

      If the original FF execution is confirmed as double metal shielded, the closest modern cross-reference family is:

      6006-2Z / 6006ZZ

      depending on manufacturer terminology.

      6006-2Z vs 6006-2RS

      Both generally share:

      30 × 55 × 13 mm

      but the closure design is different.

      6006-2Z / ZZ

      • Metal shields on both sides
      • Lower friction
      • Generally better suited to higher rotational speed
      • Good grease retention
      • Helps keep out larger contamination

      6006-2RS / 2RSH / 2RS1

      • Rubber contact or near-contact seals
      • Better protection against fine dust and moisture
      • Higher friction
      • Usually lower permissible speed than equivalent shielded versions

      Therefore, 6006-2RS should not automatically replace MRC 106KSFF simply because the dimensions are identical.

      Important Cross-Reference Consideration

      Before replacing the original MRC bearing, verify:

      • Bore = 30 mm
      • OD = 55 mm
      • Width = 13 mm
      • Shield / seal arrangement
      • Internal clearance
      • Cage construction
      • Grease specification
      • Precision class
      • Operating speed
      • Operating temperature
      • Shaft fit
      • Housing fit

      Dimensions alone do not guarantee complete interchangeability.

      (Always verify the complete marking on the original MRC 106KSFF before selecting SKF 6006-2Z, FAG 6006-2Z, NSK 6006ZZ, NTN 6006ZZ, or another equivalent.)

      📦 Availability

      ✅ In Stock

      🚚 Fast Delivery Available

      🌎 Worldwide Shipping Available

      📦 MOQ: 1 Piece

      🏭 Suitable for electric motors, pumps, fans, gearboxes, conveyors, rollers, agricultural equipment, and general machinery requiring a 30x55x13 mm double-shielded deep groove ball bearing.

      📲 Contact via LINE ID: dusitrea

      📧 Email: sales@seal4go.com

      💬 Technical support available before ordering

      🔍 Assistance available for cross-reference and equivalent part identification

      MRC-SKF-106KSFF

      Data sheet

      Inside Diameter (I.D.) - m.m.
      30
      Outside Diameter (O.D.) - m.m.
      55
      Thickness - m.m.
      13
      Material
      BEARING STEEL
      Cover Material
      BEARING STEEL
      Brand
      MRC(SKF)-USA
      Item Condition
      New

      Specific References

      No customer reviews for the moment.

      Write your review
      MRC (SKF) 106KSFF Deep Groove Ball Bearing Price | 30x55x13 mm | Extra Light Series | Double Shielded
      MRC 106KSFF Ball Bearing

      MRC (SKF) 106KSFF Deep Groove Ball Bearing Price | 30x55x13 mm | Extra Light Series | Double Shielded