NICE 1622DS-TN Ball Bearing is an inch-series industrial ball bearing intended for rotating equipment such as motors, gearboxes, pumps, conveyors, transmission assemblies, and general machinery. The suffix DS-TN is manufacturer-specific, so the exact sealing/shielding arrangement, cage material, internal clearance, lubrication, dimensions, and other...

SKF 6309 Ball Bearing is a standard metric single-row deep groove ball bearing with nominal dimensions of 45 mm bore × 100 mm outside diameter × 25 mm width . It is widely used in electric motors, industrial pumps, gearboxes, fans, conveyors, agricultural machinery, transmission systems, and other rotating equipment. The...

MRC (SKF) 5218KF Double Row Ball Bearing is a large metric double-row bearing commonly used where a compact bearing arrangement must support high radial loads together with axial loads in both directions . The nominal 5218 dimensions are approximately 90 mm bore × 160 mm outside diameter × 52.4 mm...

NICE 1638DS Ball Bearing is a single-row, double-shielded deep groove radial ball bearing manufactured in inch dimensions. It has a 3/4-inch (19.05 mm) bore, 2-inch (50.80 mm) outside diameter, and 9/16-inch (14.29 mm) width . The DS configuration uses metal shields on both sides to help retain...

FAG 6405 Ball Bearing is a standard metric single-row deep groove ball bearing with nominal dimensions of 25 mm bore × 80 mm outside diameter × 21 mm width . It is designed for industrial rotating equipment where reliable radial-load support, smooth operation, and moderate axial-load capability are...

MRC (SKF) ER-19 Ball Bearing is an inch-series industrial ball bearing with a 1-3/16 inch (30.16 mm) bore , 62 mm outside diameter , and 22.2 mm outer-race width . It features a set-screw locking system with screws positioned 120° apart , allowing the bearing inner ring to...

HOFFMAN 62300 Ball Bearing is a single-row deep groove ball bearing with an unusually wide cross-section, using nominal dimensions of 10 mm bore × 35 mm outside diameter × 17 mm width . The original Hoffmann brand was a historic British bearing manufacturer, and genuine older Hoffmann bearings are now commonly...

MRC (SKF) 210-MFF-G1 Ball Bearing is a special Max-Type / Filling-Slot deep groove ball bearing designed to carry higher radial loads than a conventional 6210-type bearing of similar dimensions. The bearing uses a filling-slot construction , allowing a greater number of balls to be installed inside the bearing. This increases its...

MRC (SKF) 206SFFC Ball Bearing is a special single-row deep groove ball bearing with an extra-wide Cartridge Width construction. Compared with a conventional 6206 bearing, the 206SFFC has a significantly wider section while maintaining a 30 mm bore and 62 mm outside diameter .<span...

MRC (SKF) 38FSF2 Ball Bearing is a special-dimension MRC industrial ball bearing with a nominal size of approximately 8 mm bore × 24 mm outside diameter × 7 mm width . The bearing is particularly important from a cross-reference standpoint because its dimensions are close to the common SKF 608 series , but it is...

MRC (SKF) 5106SBZZ is a double row angular contact ball bearing designed primarily for use as an automotive A/C compressor clutch bearing . Its nominal dimensions are: 30 mm bore × 55 mm outside diameter × 23 mm width This bearing is designed to support a combination of radial loads and axial...

MRC (SKF) 304SZZC Ball Bearing is a special single-row deep groove radial ball bearing in a Cartridge-Type configuration , designed with a substantially wider section than the standard-width 304SZZ bearing. Nominal dimensions: 20 mm bore...